Boydur® Marker 564 — MMA cold-plastic marking, laid 2–3 mm thick

Boydur® Marker 564 is a two-component, cold-applied road marking system based on methyl methacrylate (MMA), manufactured by Boytorun Kimya Sanayi A.Ş. in Istanbul since 1965. It is poured into a template and spread to a 2–3 mm layer, so it leaves a far thicker and more durable line than sprayed paint.

Why Marker 564

• Thick: a 2–3 mm layer withstands wheel abrasion much longer than a thin paint film.
• Sharp: laid inside a template, it gives smooth surfaces and clean edges.
• Fast: open to traffic about 1 hour after application, so lanes and aprons reopen within a short maintenance window.
• Durable: built for outdoor exposure and heavy industrial traffic.

Where it is used

• Airport aprons, taxiways, service roads and stand markings
• Port terminals, container yards and RoRo ramps
• Factory entrances, internal roads and logistics yards
• Car parks, pedestrian crossings and arrows

Laid, not sprayed

Marker 564 is a structured, thick-layer system. Colours: white, yellow and red. For airfield markings, colour, visibility and application method follow the airport’s own specifications.

FAQ

How soon can traffic use the line?

About 1 hour after application.

Does it contain glass beads?

Yes. Glass beads are already in the mix, and more can be broadcast on top for extra retroreflectivity. The top broadcast is optional; the system can be applied without it.

Is Marker 564 a paint?

It is an MMA cold-plastic marking material: two components mixed on site and laid 2–3 mm thick, not a solvent paint film.

Can it be applied on concrete and asphalt?

Yes. Very smooth or surface-hardened concrete is checked for adhesion first and primed where needed.

Do you supply road-paint manufacturers?

Yes, the binder resin Boydur® 564 is sold separately to paint producers.

Get a recommendation

Send us your site type, line plan and target reopening time — info@boytorun.com · WhatsApp +90 542 437 90 05.

İlgili ürün: Boydur® Marker 564 (Türkçe ürün sayfası)